Pro-Therm Specialty High Temperature Resistant Membrane Element - Proshare Innovation Suzhou Co.,Ltd.
Second slide
PRODUCTS
PRODUCTS
Pro-Therm Specialty High Temperature Resistant Membrane Element
Pro-Therm Specialty High Temperature Resistant Membrane Element
Pro-Therm Specialty High Temperature Resistant Membrane Element1
Pro-Therm Specialty High Temperature Resistant Membrane Element2

 

PSI MEMBRANE® Pro-Therm Specialty High Temperature Resistant Membrane incorporating innovative Thin Film Nanocomposite (TFN) high-temperature resistant membrane sheets and unique high-temperature resistant materials. These elements are ideal for hot water disinfection systems, replacing chemical disinfection to enhance product quality and meet regulatory standards.They are suitable for water purification or process fluid systems with low cross-flow environments, no suspended solids, and a maximum temperature of 70℃ (158℉), and can be used for concentrating high-temperature process fluids. Typical applications include concentration, purification, and separation of high dissolved solids fluids that are difficult to use membrane processes due to high viscosity at lower temperatures.

 

Product Parameter

Product Stabilized Salt Rejection(%) Permeate Flow Rate GPD(m³/d) Active Area Ft² (m²) Feed Spacer Thickness(mil)
Pro-Therm-RO67-8040 98 9000 (34.1) 400 (37.2) 34
Pro-Therm-NF98-8040 98 6000 (22.7) 400 (37.2) 34
Pro-Therm-NF96-8040 96 9000 (34.1) 400 (37.2) 34
Pro-Therm-NF92-8040 92 11000 (41.6) 400 (37.2) 34
Pro-Therm-NF80-8040 80 12000 (45.4) 400 (37.2) 34
Pro-Therm-NF35-8040 35 18000 (69.8) 400 (37.2) 34
1. Permeate flow rate and stabilized salt rejection were based on the following standard test conditions (before any hot water disinfection):
For NF membranes – 2000 ppm MgSO4, 0.48 MPa, 25℃, 15% recovery;
For RO membranes – 2000 ppm NaCl solution, 1.55 MPa, 25℃, 15% recovery;
2. The variation range of permeate flow rate is +/-15%, and the final water yield may fluctuate more due to the heat treatment process.

 

Operating Condition

Maximum Operating Temperature(Disinfection temperature) 70℃ (90℃)
Maximum Operating Pressure 1200 psi (83 bar)
Maximum Pressure Drop 1 bar
Continuous Operating pH Range 3-10
Cleaning pH Range 1-12
The largest water SDl15 5
Maximum influent turbidity 1 NTU
Maximum residual chlorine concentration of influent <0.1 ppm
Online Message