Pro-PFAS Membrane Element - Proshare Innovation Suzhou Co.,Ltd.
Second slide
PRODUCTS
PRODUCTS
Pro-PFAS Membrane Element
Pro-PFAS Membrane Element
Pro-PFAS Membrane Element1
Pro-PFAS Membrane Element2

 

What is PFAS?
PFAS are a group of manufactured chemicals that have been used in industry and consumer products since the 1940s because of their useful properties. There are thousands of different PFAS, some of which have been more widely used and studied than others.Perfluorooctanoic Acid (PFOA) and Perfluorooctane Sulfonate (PFOS), for example, are two of the most widely used and studied chemicals in the PFAS group. PFOA and PFOS have been replaced in the United States with other PFAS in recent years.One common characteristic of concern of PFAS is that many break down very slowly and can build up in people, animals, and the environment over time.

 

Additional information and useful links:

• PFAS Explained
• Filipino study shows high levels of “forever chemicals” in women with breast cancer in the Greater Manila Area

 

LET’S END PFAS.
We care for you...

Proshare, China's sole innovative company with patented Thin Film Nanocomposite (TFN) membrane technology, provides various solutions to remove PFAS from contaminated water sources to levels that comply with current regulations.

PSI MEMBRANE® Thin-Film nanocomposite (TFN) reverse osmosis membrane technology has proven effective in removing PFAS at various contamination sites, reducing PFAS to non-detectable levels, and is ideal to serve industrial applications for seeking superior rejection at ultra-low operating pressure and led to cost efficiency.

 

Key Features

n Reducing PFAS to non-detectable levels.
n Produces 30% higher water flux compared to traditional TFC membranes.
n Ultra-low operating pressure with high salt rejection rate.
n Stable and chemical-resistant membrane structure ensures long-term reliability.

 

Product Parameter

Product Active Area ft² (m²) Feed Spacer Thickness(mil) Permeate Flow Rate GPD(m³/d) Stabilized Salt Rejection(%) Minimum Salt Rejection(%)
Pro-PFAS-4040 85(7.9) 34 2500(9.5) 99.55 99.4
Pro-PFAS-8040 400(37.2) 34 10500(39.7) 99.55 99.4
1. Permeate flow rate and stabilized salt rejection are base on the following test conditions: Feed water concentration 1500 ppm as NaCl, Feed water pressure 150 psi (1.03 MPa), Feed water temperature 77°F (25°C), Recovery rate 15% recovery.
2. Variation range of permeate flow rate +/-15% .

 

Operating Condition

Maximum Operating Temperature 45℃
Maximum Operating Pressure 600 psi(41 bar)
Maximum Pressure Drop 1 bar
Continuous Operating pH Range 2-11
Cleaning pH Range 1-13
The largest water SDl15 5
Maximum influent turbidity 1 NTU
Maximum residual chlorine concentration of influent <0.1 ppm
Online Message