Pro-LP Ultra-low Pressure RO Membrane Element - Proshare Innovation Suzhou Co.,Ltd.
Second slide
PRODUCTS
PRODUCTS
Pro-LP Ultra-low Pressure RO Membrane Element
Pro-LP Ultra-low Pressure RO Membrane Element
Pro-LP Ultra-low Pressure RO Membrane Element1
Pro-LP Ultra-low Pressure RO Membrane Element2

 

PSI MEMBRANE® Pro-LP Ultra-low Pressure Membrane is a third-generation Thin Film Nanocomposite (TFN) RO membrane element. It achieves high flux at ultra-low operating pressure and led to system investment and operating costs.

 

Key Features

n Ultra-low operating pressure combined with high salt rejection rate;
n Stable chemical resistance to cleaning ensures long-term operational reliability;
n Excellent anti-fouling performance of TFN surface for long service life;
n TFN membrane flux is generally 30% higher than traditional TFC, with lower energy consumption.

 

Product Parameter

Product Stabilized Salt Rejection(%) Permeate Flow Rate GPD(m³/d) Active Area Ft² (m²) Feed Spacer Thickness (mil)
Pro-LP-4040 99.40 2800 (10.6) 85 (7.9) 34
Pro-LP-8040 99.40 12000 (45.9) 400 (37.2) 34
1. Permeate flow rate and stabilized salt rejection were based on the following standard test conditions: 1500 ppm NaCl, 150 psi(1.03MPa), 77 ℉(25 ℃), 15% recovery;
2. Permeate flow rate varies by +/-15%.

 

Operating Condition

Maximum Operating Temperature 45℃
Maximum Operating Pressure 600 psi(41 bar)
Maximum Pressure Drop 1 bar
Continuous Operating pH Range 2-11
Cleaning pH Range 1-13
The largest water SDl15 5
Maximum influent turbidity 1 NTU
Maximum residual chlorine concentration of influent <0.1 ppm
Online Message